quickstart guide
TPCS-4SM & TPCS-4SMD
www.crestron.com
888.273.7876 201.767.3400
Specifications subject to
change without notice.
TPCS-4SM & TPCS-4SMD
4.3” Touch Screen Control Systems
The Crestron
®
TPCS-4SM and TPCS-4SMD ship with 10 “hard key” push buttons for
quick access to commonly used functions. Optional, custom engravable button
covers are available (4SM-BTNO-[B, W]-S and custom engraving sold separately).
For a clean appearance, either column of buttons may be removed and covered
using the no-button covers provided.
To change the inserts or covers, use the following procedure:
1. Insert a small, slot head screwdriver into the appropriate hole on the bottom of
the touch screen to release its cover. Refer to the following illustration.
1
Change the Button Inserts or Button Covers
QUICKSTART DOC. 7230D (2032259, Sheet 1 of 2) 05.13
1
Mounting in a US Electrical Box
2
Install the Touch Screen
2. With the bottom of the cover released, gently remove it from the touch screen.
3. If removing the button insert, after releasing and removing the button cover,
use a small slot head screwdriver to press and gently lift the button insert from
the touch screen. Refer to the following illustration for the press and lift points
on the button insert.
4. Gently place the new cover in position and press it into place.
2. Use the two included #06-32 x 1 x 1/2” screws (2007254) to attach the back
panel to a horizontally mounted electrical box, as shown in the following
illustration.
Mounting the Touch Screen into an Electrical Box
Snap the Touch Screen into Place
3. Carefully position the front of the touch screen over the back panel and gently
snap it into place, as shown in the following illustration.
4. Use two of the included #04-40 x 1/4” screws to secure the touch screen, as
shown in the following illustration:
a. For standard applications, use the Phillips screws (2007152 or 2007160).
b. For secure applications, use the security type Torx screws (2025311 or
2025312) along with the included Torx screwdriver bit (2025915).
NOTE: If using the touch screen with a C2N-IO Control Port Expansion Module,
install the C2N-IO in the electrical box using the fastener included with the module.
For details, refer to the latest version of the C2N-IO Operations & Installation Guide
(Doc. 7236). It is available from the Crestron Web site (www.crestron.com/manuals).
Insert screwdriver to release covers
Use screwdriver to release button insert
Insert screwdriver
to separate back of touch screen
Screws (2) #06-32 x 1 1/2” (2007254)
Horizontally mounted
electrical box
NOTE: When mounting the TPCS-4SM or TPCS-4SMD into an electrical box, the
box must be installed horizontally.
The TPCS-4SM and TPCS-4SMD touch screens install simply and easily into a
standard electrical box or onto virtually any flat surface.
A tabletop enclosure, the TTS-4SM and swivel mount, SMK-4SM are also available
(both sold separately). For mounting onto a flat surface, use the MSMK-4SM
Multi-Surface Mounting Kit (sold separately).
The TPCS-4SM and TPCS-4SMD are supplied with screws for installation into an
electrical box.
To mount the TPCS-4SM or TPCS-4SMD into an electrical box, use the following
procedure:
1. Insert a small slot head screwdriver into the hole shown in the following
illustration and gently separate the back of the touch screen.
Insertion Point for Separation of Back Panel
Insertion Points for Button Cover Releases
Touch Screen with Button Inserts
Touch Screen with No-Button Covers
NOTE: Use the left and right screw holes for attachment to the electrical box.
For Regulatory Compliance information, refer to the latest
version of Doc. 7229.
(82 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales