Crestron CLSI-C6M Especificaciones descargar pdf

iLux

™

Lighting Systems

Specifications

Introduction

Following are specifications for the iLux units.

Features and Functions

CLSI-C6 & CLSI-C6M Specifications

The iLux

™

units, CLSI-C6 and CLSI-C6M, are wall-

mounted complete integrated lighting systems that can

function as standalone devices and/or be part of a

Crestron

solution total control system network

(Cresnet

). The units are functionally identical except that

the CLSI-C6M includes a built-in motion sensor.

SPECIFICATION

DETAILS

Power Requirements Line Power, 230 VAC, 50/60Hz

Load Ratings

Max load per channel:

Min load per channel:

Max load per unit:

800 W/VA

(3.5 Amps @ 230 VAC)

25 W/VA

(0.108 Amps @ 230 VAC)

2300 W/VA

(10 Amps @ 230 VAC)

Load Types

Incandescent, magnetic low

voltage, neon/cold cathode, and

non-dim lighting.

IR Receiver For use with Crestron IR remote

(sold separately).

Motion Detector

(CLSI-C6M only)

Type

Range

Infrared

20 to 30 feet at 4-foot elevation

(6 to 9 meters at 1.2 meter

elevation)

Default Net ID 1F

Control System Update Files

2, 3

2-Series Control System

Version 2.004.CUZ or later

Firmware CLSI-C6.v1.02.02.upg or later

Cooling Requirement 63 BTU/Hr (approximate)

Environmental Temperature 32° to 104°F (0° to 40°C)

Humidity 10% to 90% RH

(non-condensing)

Overall Dimensions:

Height

Width

Depth

4.48 in (11.38 cm)

8.89 in (22.58 cm)

2.47 in (6.25 cm) for CLSI-C6

2.60 in (6.61 cm) for CLSI-C6M

Weight 22.8 oz (646.37 g)

CLSI-C6M with Cover Open, Shown in Almond

Each unit provides automated control of up to six

channels of lighting loads, including incandescent,

magnetic low-voltage, neon/cold cathode, and non-

dimmable loads. Each unit also provides automated

control of up to six groups of shade and drape controllers

for motorized window treatments, screens, and lifts.

Front panel operation provides manual control of lighting

loads and shade groups as well as access to up to sixteen

scenes (lighting level/shade position combinations).

A built-in IR receiver allows for wireless operation using

an optional infrared remote generating standard RC5

commands; a built-in motion detector (CLSI-C6M only)

enables automated control based on room occupancy.

1. Additional load types can be controlled and load ratings can be increased via

optional CLS-EXP expansion modules. Refer to the Crestron website

http://www.crestron.com/

for details.

2. The latest versions can be obtained from the Crestron website. Refer to NOTE

after last footnote.

3. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest

Crestron Product Catalog for a complete list of 2-Series control systems.

Up to 16 Crestron keypads (sold separately) can be used

with each unit for control of rooms that have several

entrances or work areas. Each unit also supports up to

eight additional CLSI-C6 units, enabling systems of up to

54 lighting channels and 54 shade groups.

NOTE: Crestron software and any files on the website

are for Authorized Crestron dealers and Crestron

Authorized Independent Programmers (CAIP) only. New

users may be required to register to obtain access to

certain areas of the site (including the FTP site).

Each unit provides control system integration through two

separate Cresnet control networks; one for local devices

and one for connection to a 2-Series control system.

Each unit is available in three colors: almond, black, or

white. The letter at the end of the product name, ‘A’, ‘B’,

or ‘W’, denotes the color (e.g., a CLSI-C6MA is an

almond unit).

Crestron Electronics, Inc. Installation Guide – DOC. 6413B

15 Volvo Drive Rockleigh, NJ 07647 (2014211)

Tel: 888.CRESTRON 05.08

Fax: 201.767.7576 Specifications subject to

www.crestron.com change without notice.

1 2 3 4

Lighting Systems 1

Indice de contenidos

Pagina 1 - Lighting Systems

iLux™ Lighting Systems Specifications Introduction Following are specifications for the iLux units. Features and Functions CLSI-C6 & CLSI-C

Pagina 2

iLux™ Lighting Systems Physical Description NOTE: The CLSI-C6 units require a neutral wire for operation. If no neutral is present, contact a licen

Pagina 3

iLux™ Lighting Systems 5. Connect each load wire to the corresponding LOAD terminals on the unit, connect the power T line hot wire from the circui

Pagina 4

iLux™ Lighting Systems Return and Warranty Policies Problem Solving Merchandise Returns / Repair Service Troubleshooting 1. No merchandise may be r

Comentarios a estos manuales

Sin comentarios

Crestron CLSI-C6M Especificaciones

Busca en linea o descarga Especificaciones para No Crestron CLSI-C6M. Crestron CLSI-C6M Specifications Manual de usuario

Indice de contenidos

Comentarios a estos manuales

Relacionado con productos y manuales para No Crestron CLSI-C6M