Crestron QuickMedia QM-AMP3X80MM Guía de instalación descargar pdf (Pagina 54)

FlipTop Computer Center Crestron QM-FTCC

Firmware Upgrade

A firmware upgrade

file has the extension .upg.

To take advantage of all the QM-FTCC features, it is important that the unit

contains the latest firmware available. Please check the Crestron website for the

latest version of firmware. Not every product has a firmware upgrade, but as

Crestron improves functions, adds new features, and extends the capabilities of

its products, firmware upgrades are posted.

To upgrade the firmware, complete the following steps.

NOTE: A firmware upgrade file has the extension .upg.

The following is the acceptable file extension for a firmware update file.

.upg QM-FTCC.V.XXXXX.upg

1. Make sure that “Communication Settings,” which begins on page 44,

has been performed.

2. Open Crestron Toolbox.

3. Once communication is established, click Tools | System Info. The

Functions menu becomes available.

4. As shown after this step, select Functions | Firmware.

Functions Menu - Firmware Selection

50 • FlipTop Computer Center: QM-FTCC Operations & Installation Guide - DOC. 6313A

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

Sin comentarios

Crestron QuickMedia QM-AMP3X80MM Guía de instalación Pagina 54