Crestron SIRIUSSatellite Radio Guía de instalación descargar pdf (Pagina 10)

AM/FM/SR Tuner Card Crestron Adagio

ATC-AMFMSRD

Setup

This section contains hardware installation and setup instructions for the

ATC-AMFMSRD.

Required Tools/Hardware

1. Small flat bladed screwdriver

2. Grounding strap (encouraged)

Installation

CAUTION: The ATC-AMFMSRD and the Adagio

systems contain electrostatic

discharge (ESD) sensitive devices. Crestron encourages you to wear a grounding

strap to avoid damaging the card and/or the host system.

When inserting a card into an Adagio system you may need to move other source

connections if designated connectors are occupied by other sources. For

programming purposes, slots and source connections are matched according to the

following table:

Slot 1 Slot 2 Slot 3

Source

Connections

1&2 3&4 Refer to

note below.

CAUTION: Do not connect external sources to SOURCES connectors used by tuner

cards.

CAUTION: Be certain to insert tuner card before applying power to the Adagio

system.

NOTE: If the user intends to use the out-of-the-box functionality, do not to use

SLOT 3 for tuner cards; otherwise, SLOT 3 uses source connections 5 and 6. Does

not pertain to the CEN-TRACK.

Begin the card insertion procedure with these steps:

Disconnect power from the Adagio system.

Remove the slotted screws securing any cover plate that may be

fastened the slot you intend to use. Set the screws and the cover plate

aside.

Unpack the ATC-AMFMSRD card.

As shown in the photo following this step, position the

ATC-AMFMSRD card so the print on the faceplate is right side up and

the side rails of the card slide into the plastic slots mounted on the left

and right inside walls of the Adagio system.

6 • AM/FM/SR Tuner Card: ATC-AMFMSRD Operations & Installation Guide – DOC. 6629A

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Sin comentarios

Crestron SIRIUSSatellite Radio Guía de instalación Pagina 10