Crestron APAD Manual de usuario descargar pdf (Pagina 2)

Crestron MPS-100 Multimedia Presentation System 100

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

Tel: 800.237.2041 / 201.767.3400

Fax: 201.767.1903

www.crestron.com

Room Control Options—Without requiring any programming, the MPS-100 can

be controlled simply using a Crestron APAD LCD Controller or a selection of

keypads. With custom programming, our complete line of Isys™ touchpanels

and MediaManager FlipTops is supported. Equipped with an optional

CNXRMIRD IR receiver, the MPS-100 allows any Crestron IR wireless touch-

panel or handheld remote to be used for a low-cost wireless control solution. Or,

adding an RF wireless gateway or Wi-Fi access point enables use of a wide

range of 1-way and 2-way RF wireless handheld remotes and touchpanels.

AVAILABLE MODELS

MPS-100

Multimedia Presentation System w/Stereo Amplifier

MPS-100-70V

Multimedia Presentation System w/70 Volt Amplifier

MPS-100-100V

Multimedia Presentation System w/100 Volt Amplifier

SPECIFICATIONS

Processor

CPU: 32-bit Freescale ColdFire® Microprocessor

Memory

SDRAM: 32 MB

NVRAM: 256 KB

Flash: 16 MB

Operating System

Real-time, preemptive, multitasking kernel, multi-threaded; FAT32 file system with long

names; supports SIMPL™ Windows

and SIMPL+

Ethernet

10/100BaseT, static IP or DHCP/DNS, SSL, auto-negotiating, full duplex TCP/IP, UDP/IP,

CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control

XPanel and RoomView

applications

Video

Switcher: 5x2 crosspoint matrix, 1x4 output format selector, RGB pass-thru mode (multi-

format via RGB output connection)

Signal Types: RGB and composite, S-Video, or component video (does not transcode)

Video/HDTV Formats: NTSC or PAL, HDTV up to 1080i/1080p

RGB Formats: RGBHV, RGBS

Maximum Resolution: QXGA 2048 X 1536 @60Hz (WUXGA 1920 X 1200 @60Hz via QM)

Blanking Time: < 0.1 second

Sync Rise/Fall Time: 3.5 ns maximum

Sync Latency: < 30 ns

Gain: 0dB (75 ohms terminated)

Audio

Switcher/Preamp: 5x2 stereo crosspoint matrix, stereo volume/tone control on

PROGRAM output, integrated power amplifier

Volume Gain Range: -80dB to +20dB, 1 dB steps

Mute: -100dB (electronic), -120dB (relay)

Input Compensation: ±10dB

Bass Gain Range: ±12dB @ 100Hz, 2 dB steps

Treble Gain Range: ±12dB @ 10kHz, 2 dB steps

Frequency Response: 20Hz to 20kHz ±0.5dB (PROG/LINE OUT), 20Hz to 20kHz ±0.5dB

(SPEAKER @ 8 ohms), 100Hz to 20kHz ±1.5dB (SPEAKER @ 70V or 100V)

S/N Ratio: 90dB (PROG/LINE OUT @ 10dBV, 20Hz to 20kHz A-weighted), 90dB

(SPEAKER @ 8 ohms, full output, 20Hz to 20kHz A-weighted), 90dB (SPEAKER @ 70V or

100V, full output, 20Hz to 20kHz A-weighted)

THD+N: 0.05% (PROG/LINE OUT @ 10dBV, 20Hz to 20kHz), 0.7% (SPEAKER @ 8 ohms,

full output, 20Hz to 20kHz), 0.7% (SPEAKER @ 70V or 100V, full output, 100Hz to 20kHz

A-weighted)

Stereo Separation: -75dB (PROG/REC OUT @ 10dBV, 20Hz to 20kHz), -60dB (SPEAKER

@ 8 ohms, full output, 20Hz to 20kHz)

Channel Crosstalk: -70dB (AUD IN @ 10dBV, 20Hz to 20kHz)

Connectors – Audio

PROG OUT: (1) 5-pin 3.5mm detachable terminal block

Balanced/unbalanced stereo line-level output, variable levels

Output Impedance: 200 ohms balanced, 100 ohms unbalanced

Maximum Output Level: 4 V

RMS balanced, 2 VRMS unbalanced

LINE OUT: (1) 5-pin 3.5mm detachable terminal block

Balanced/unbalanced stereo line-level output, fixed levels

Output Impedance: 200 ohms balanced, 100 ohms unbalanced

Maximum Output Level: 4 V

RMS balanced, 2 VRMS unbalanced

AUD IN 1 - 5: (5) 5-pin 3.5mm detachable terminal blocks

Balanced/unbalanced stereo line-level inputs

Input Impedance: 24k ohms balanced/unbalanced

Balanced Input Level: -20 to +12 dBV; 4 V

RMS maximum

Unbalanced Input Level: -20 to +6 dBV; 2 V

RMS maximum

SPEAKER: (1 or 2) 2-pin 5mm detachable terminal blocks, speaker-level audio outputs

Wire Size: Connector accepts 12 AWG maximum

Output Power (MPS-100): 20W RMS per channel stereo into 8 ohms, 4 ohms tolerant

Output Power (MPS-100-70V): 40W RMS mono at 70 Volts

Output Power (MPS-100-100V): 40W RMS mono at 100 Volts

Connectors – Video

COMP/Pb, Y/Y, C/Pr 1 - 2: (2) sets of (3) BNC female video inputs

Each set configurable as:

(1) Component/HDTV (YP

BPR) video input, or

(1) S-Video (Y/C) input, or

(1) Composite input

Input Level: 1 V

P-P nominal

Input Impedance: 75 ohms nominal

DC Offset: Insensitive to DC offset (AC coupled)

Video signal sensing on COMP/P

B or Y/Y

RGBHV 3 - 5: (3) DB15HD female, RGBHV (VGA) inputs

Format: RGBHV or RGBS

RGB Input Level: 1 Vp-p nominal

RGB Input Impedance: 75 ohms nominal

Sync Input Level: 2 to 5 Vp-p

Sync Input Impedance: 75, 500, or 1k ohms individually selectable for H and V via

bottom panel DIP switch

Video signal sensing on “H-SYNC”; Defeatable DDC pull-up resistors

COMP OUTPUT 1: (1) BNC female, composite video output

Output Level: 1.0 to 1.1 V

P-P (terminated, with 1 VP-P input)

Output Impedance: 75 ohms nominal

Y, C OUTPUT 1: (2) BNC female, S-Video (Y/C) video output

Output Level: 1.0 to 1.1 V

P-P (terminated, with 1 VP-P input)

Output Impedance: 75 ohms nominal

1 2 3 4

Comentarios a estos manuales

Sin comentarios

Crestron APAD Manual de usuario Pagina 2

Comentarios a estos manuales

Relacionado con productos y manuales para Proyectores de datos Crestron APAD