Crestron CT-1600 Manual del operador descargar pdf (Pagina 10)

BROWN UNIVERSITY: Barus & Holley: Auditorium

Audiovisual System Operator’s Manual Page 9

Connecting a Laptop to the System

The presenter may display video from a portable or laptop computer. The

computer’s audio can be played through the room sound system as well. Using a

Laptop Breakout Cable (LBC), the user can connect the computer to a computer

interface mounted on the teaching station. To connect a computer to the

audiovisual system, follow these steps:

1) Set up the computer near the computer interface described above and

depicted below.

The general setup of the interface and computer is shown below:

2) Connect the LBC to the computer’s video port. Connect the other end of

the breakout cable to the 9-pin connector on the interface labeled

"INPUT".

3) Connect a 1/8" stereo audio cable (looks like a headphone plug on both

ends) between the computer’s audio output jack and the "PC AUDIO" jack

on the interface.

4) Start up the computer.

5) Power up the audiovisual system (see “Powering the System On/Off”).

6) Select “LAPTOP” from the Main Menu.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Crestron CT-1600 Manual del operador Pagina 10