Crestron ST-1700C Especificaciones descargar pdf (Pagina 16)

1-Way Wireless RF Touchpanel Crestron ST-1700C

NOTE: If the control system in use has a 4-pin network connector rather than a

modular (RJ11-type) NET connector, use a ST-CBL (sold separately).

NOTE: To make a cable for either configuration, refer to the “Programming Cable

Specifications” diagram after these notes.

NOTE: The RJ11 (part of ST-PK) and ST-CBL cables can also be found as part

numbers CNSP-585 and CNSP-586, respectively, in the Crestron cable database. The

database can be downloaded from the Downloads | Software Updates | Cables section

of the Crestron website (www.crestron.com

Programming Cable Specifications

CONNECTOR, 6 PIN, RJ11

(TAB FACING AWAY)

BLACK

RED

SHIELD

- OR -

1. Before making any connections to the touchpanel, verify that control system is

properly connected to the PC (using ST-PK cable 15717 and adapter) and

powered on.

2. Attach the stereo connector end of the ST-PK cable 15710, to the touchpanel.

3. Attach the RJ11 connector end of the ST-PK cable 15710, to the connector

labeled NET on the control system.

4. Attach the appropriate external power pack or equivalent to touchpanel and

plug into outlet. At the PC, make sure that no programs accessing the COM

port of the PC are running.

5. Start VT Pro-e.

6. From the e menu bar, select Tools | Viewport to open the Crestron Viewport.

NOTE: SIMPL Windows may open with a splash screen and may display the “What

do you want to do?” window. If so, close the window and continue.

12 • 1-Way Wireless RF Touchpanel: ST-1700C Operations Guide – DOC. 6050

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Sin comentarios

Crestron ST-1700C Especificaciones Pagina 16