Crestron C2N-MMS Guía de instalación descargar pdf (Pagina 12)

Scan Converter Card for C2N-MMS Crestron C2N-MMS-SC

8. Re-install the 16 base cover screws to finger-tight then, using a

#2 Phillips screwdriver, tighten each screw an additional 1/8-

turn. Refer to the following diagram for screw locations.

C2N-MMS-SC Installation – Reinstall C2N-MMS Cover Screws

9. Re-connect all cables to the appropriate ports on the rear of the

C2N-MMS.

Setup

A C2N-MMS with the C2N-MMS-SC scan converter is installed and

connected just like a standard C2N-MMS. For instructions on installing,

connecting, and addressing the C2N-MMS in a Cresnet network, refer to

the latest revision of the C2N-MMS Operations Guide (Doc. 6132).

Programming Software

The following are the minimum software version requirements for the

PC:

• SIMPL Windows version 2.03.18 or later with Library Update file

202 or later. Requires SIMPL+ Cross Compiler version 1.1.

• Application Builder (optional) version TBD (check with Crestron

in 1Q 2003) with Application Builder Templates version TBD

(check with Crestron in 1Q 2003). Requires SIMPL Windows.

8 • Scan Converter Card for C2N-MMS: C2N-MMS-SC Operations & Installation Guide - DOC. 6138

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Sin comentarios

Crestron C2N-MMS Guía de instalación Pagina 12