Crestron C2N-RTHS Guía de instalación descargar pdf (Pagina 9)

Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet

Setup

Network Wiring

When wiring the Cresnet network, consider the following:

• Use Crestron Certified Wire.

• Use Crestron power supplies for Crestron equipment.

• Provide sufficient power to the system.

CAUTION: Insufficient power can lead to unpredictable results or

damage to the equipment. Use the Crestron Power Calculator to

help calculate how much power is needed for the system

(

www.crestron.com/calculators).

For networks with 20 or more devices, use a Cresnet Hub/Repeater

(CNXHUB) to maintain signal quality.

For more details, refer to “Check Network Wiring” which starts on page

14.

Identity Code

The Net ID of the C2N-RTHS has been factory set to 2B. The Net IDs of

multiple C2N-RTHS devices in the same system must be unique. Net IDs

are changed from a personal computer (PC) via Crestron Toolbox™ (refer

to “Establishing Communication” on page 12).

When setting the Net ID, consider the following:

• The Net ID of each unit must match an ID code specified in the

SIMPL™ Windows program.

• Each network device must have a unique Net ID.

For more details, refer to the Crestron Toolbox help file.

Operations and Installation Guide - DOC. 6232B Sensor, Cresnet

• 5

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Sin comentarios

Crestron C2N-RTHS Guía de instalación Pagina 9