Crestron C2N-SDC Guía de instalación descargar pdf (Pagina 6)

Shade & Drape DC Motor Controller Crestron C2N-SDC-DC

lockout timer that shuts the motor off for a brief time before allowing the

motor to reverse direction. Additional control is available via Cresnet.

Four pushbuttons on the face of the unit allow the motors to be activated

without Cresnet control, which is particularly useful when operating the

unit locally during installation.

Specifications

The following table summarizes the specifications for the C2N-SDC-DC.

Specifications of the C2N-SDC-DC

SPECIFICATION DETAILS

Cresnet Power Usage 3 Watts (0.125 Amps @ 24 VDC)

Default ID 23

Control System Update

Files

2, 3, 4

2-Series Control System

CNMSX-AV/PRO

CNRACKX/-DP

CEN/CN-TVAV

Version 3.117.CUZ or later

Version 5.14.02X.UPZ or later

Version 5.12.63W.UPZ or later

Version 5.12.63V.UPZ or later

Firmware Version C2N-SDC-DC.v1.0.upg

Motor Input Power 24 VDC from Cresnet

Load Types 2-wire Bi-directional DC Motor

Maximum Load per Motor 30 W each channel, 30 W total

Operating Temperature 41º to 122ºF (5º to 50ºC)

Humidity Range 10% to 90% RH

Dimensions Height: 4.10 in (10.42 cm)

Width: 4.10 in (10.42 cm)

Depth: 1.16 in (2.95 cm)

Weight 0.55 lb (0.25 kg)

1. Does not include power for the motors. For example, add 10 Watts for

each Somfy LT28B shade motor. Three Watts are consumed by the

C2N-SDC-DC when the motors are not operating. Motor loads may be

connected to the C2N-SDC-DC up to the available power remaining on

the Crestron power supply. Crestron recommends that the available power

be de-rated by a factor of two to allow for the inrush motor current that

y Shade & Drape DC Motor Controller: C2N-SDC-DC Operations & Installation Guide - DOC. 6373

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Sin comentarios

Crestron C2N-SDC Guía de instalación Pagina 6