Crestron CNHBLOCK Especificaciones descargar pdf (Pagina 6)

Multi-Type Network Distribution Block Crestron CNHBLOCK

4 •• Multi-Type Network Distribution Block: CNHBLOCK Operation & Installation Guide - DOC. 8157

CNHBLOCK With Mounting Plate

CNHBLOCK

ALL CONNECTORS ARE IN PARALLEL

B C

POWER

b c

Y Z

CRESTRONCRESTRON

Rack Installation

The CNHBLOCK may also be installed into a rack by using a CNXRMAK (not supplied).

Perform the following steps to install the CNHBLOCK into a rack. The only tool required for

this procedure is a #2 Phillips screwdriver.

1. Using a #2 Phillips screwdriver, remove the four mounting screws (shown

below) that secure the mounting plate to the CNHBLOCK and remove the plate.

Detach Mounting Plate

2. For further instructions, refer to the latest revision of the CNXRMAK Installation

Guide (Doc. 8156). This document can be obtained from the Downloads page

(MANUAL Library) of Crestron’s website (www.crestron.com). Search for

CNXRMAK.PDF. New users are required to register in order to obtain access to

the FTP site

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Crestron CNHBLOCK Especificaciones Pagina 6