Crestron CNRACKX-DP Especificaciones descargar pdf (Pagina 10)

CNX Enhanced Ethernet Expansion Card Crestron CNXENET+

26-pin male connector attaches to the DPA connector. Items 1 through 3 listed below

for installation onto the CNXCPU. The only tools required are a grounding strap and

a #1 Phillips tip screwdriver.

Referenced Items for CNXCPU Installation

ITEM DESCRIPTION PART NUMBER QUANTITY

Screw, 4-40 x 1/4"L, steel,

pan, phillips, black

SR04-40-0R2500-11

2 Plate, blank, metal, LAN/DPA MTPL02390-1 1

3 CNXENET+ ZA11281 1

CAUTION: The CNXENET+ and the CNXCPU contain ESD sensitive devices.

Perform the following procedure while wearing a grounding strap that is properly

grounded or on a grounded work station to avoid damaging the card and/or the

CNXCPU.

1. Disconnect power from the control system.

2. At the CNXCPU, note the position of any attached cables and

disconnect each cable.

3. Loosen the CNXCPU thumb screws and pull outward to remove card.

4. Refer to the diagram below. From the CNXCPU faceplate, use a #1

Phillips tip screwdriver and remove the two

mounting screws that

secure the LAN/DPA cover plate

and remove the plate.

CNXCPU Installation (1 of 3) – Remove Screws and Cover Plate

6 • CNX Enhanced Ethernet Expansion Card: CNXENET+ Operations & Installation Guide – DOC. 8153A

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

Sin comentarios

Crestron CNRACKX-DP Especificaciones Pagina 10