Crestron C2ENET-2 Guía de instalación descargar pdf (Pagina 15)

Crestron C2ENET-1/-2 2-Series Ethernet Interface Expansion Cards

The Viewport title bar will display the new communication settings, e.g., “Connected

to ConferenceRoom.com on Port 41795.”

For information on secure sockets layer (SSL) configuration, refer to the latest

versions of the Crestron 2-Series Control Systems Reference Guide (Doc. 6256), and

the Crestron e-Control Reference Guide (Doc. 6052). They may be downloaded from

the Downloads | Product Manuals | Software section of the Crestron website

(www.crestron.com)

Verify Communication

1. To verify the C2ENET card communication, open Viewport on your PC

and select Remote | TCP/IP | Connect from the Taskbar. The “Crestron

Viewport TCP/IP Connect” window appears.

Crestron Viewport TCP/IP Connect

2. Enter the IP number you entered earlier and click Connect. The Crestron

Viewport confirms the connection.

Crestron Viewport TCP/IP Confirmation

NOTE: If the following Error window opens, verify IP address and repeat steps 1

and 2.

Operations & Installation Guide – DOC. 5962B 2-Series Ethernet Interface Expansion Cards: C2ENET-1 & C2ENET-2 • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Sin comentarios

Crestron C2ENET-2 Guía de instalación Pagina 15