Crestron C2N-IRGW-1G Guía de instalación descargar pdf (Pagina 14)

IR Gateway Crestron C2N-IRGW-1G & C2N-IRGW-F

Hardware Hookup

Make the necessary connection as called out in the illustrations that follow this

paragraph. Refer to “Network Wiring” on page 6 before attaching the 4-position

terminal block connector from the C2N-IRGW-1G or connecting the pigtail wires

from the C2N-IRGW-F. Apply power after the connection has been made.

When making the connection to the C2N-IRGW-1G and C2N-IRGW-F, use Crestron

power supplies for Crestron equipment.

Hardware Connection for the C2N-IRGW-1G

CRESNET:

CONNECT

TO THE

CRESNET

CONTROL

NETWORK

Hardware Connection for the C2N-IRGW-F

Pigtail Wires from C2N-IRGW-F

CRESNET:

CONNECT

TO THE

CRESNET

CONTROL

NETWORK

Red (24 - Power)

White (Y - data)

Blue (Z - data)

Black (G - ground)

10 • IR Gateway: C2N-IRGW-1G & C2N-IRGW-F Operations & Installation Guide – DOC. 6468A

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Comentarios a estos manuales

Sin comentarios