Crestron CEN-CN Especificaciones descargar pdf (Pagina 23)

Crestron CEN-CN Ethernet/Cresnet Interface

Operations Guide - DOC. 5721 Ethernet/Cresnet Interface: CEN-CN •• 19

2. Enter the IP address of the configured CEN-CN and click the Connect

button. (Within the address, X and Y may range from 0 to 255. In the

example shown below, X is 1 and Y is 2.)

Connect TCP/IP Address

3. The message shown below signifies a successful connection.

Crestron Terminal Protocol Console Opened

4. Perform any of the diagnostics and features that the viewport provides.

Troubleshooting Communications via Ethernet

NOTE: Before performing this procedure, refer to “Hookup Diagram for Normal

Operation” on page 17 for cabling instructions.

You can PING the CEN-CN from a MS-DOS® prompt (Windows 95/98™) or a

Command Prompt (Windows NT™). When the CEN-CN is at address 192.168.1.2

(Within the address, X and Y may range from 0 to 255. In the example shown below,

X is 1 and Y is 2.), the unit should reply and there should be no packet loss, as

shown.

NOTE: Verify that the IP Settings of the CEN-CN are correct, and that the PC can

ping other devices that are on the CEN-CN's subnet.

MS-DOS or Command Screen

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Sin comentarios

Crestron CEN-CN Especificaciones Pagina 23