Crestron CH-DIM4-D9 Manual de usuario descargar pdf (Pagina 7)

CH-DIM4-D9 Product Manual

Crestron International • 2 Oude Keerbergsebaan • 2820 Rijmenam • Belgium

Tel: +32 15 50 99 50 • [email protected] • www.crestron-int.be

Cresnet ID

Every equipment and user interface within the network requires a unique identity code

(NET ID). These codes are recognized by a two-digit hexadecimal number from 03 to FE.

The NET ID of each unit must match an ID code specified in the Simpl Windows program.

Use the following method to change NET ID of the CH-DIM4-D9

1. Locate the two miniature rotary switches labeled HIGH and LOW on the

bottom face (refer to figure 5). The HIGH rotary switch represents the

most-significant digit or number of the ID CODE and the LOW rotary

switch represents the least-significant digit or number of the ID CODE.

Each 16-position rotary hexadecimal switch can be set to a value ranging

between 0 and F.

2. Use a small screwdriver and rotate the arrow in the center of the rotary

switch marked HI to the position of the most-significant digit or letter of the

unit's ID CODE.

3. Use a small screwdriver and rotate the arrow in the center of the rotary

switch marked LO to the position of the least-significant digit or letter of

the unit's ID CODE.

Figure 5: Rotary switches for NET-ID

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

Crestron CH-DIM4-D9 Manual de usuario Pagina 7