
DM-TX-100 DigitalMedia
™
CAT Transmitter 100
crestron.com
|
800.237.2041
DM Cable Length
Maximum length without, between, before, or after repeaters:
200 ft (60 m) for 720p, 1080i, 1080p24
200 ft (60 m) for 1024x768 @75Hz
150 ft (45 m) for 1080p60
150 ft (45 m) for 1280x1024 @75Hz
150 ft (45 m) for 1920x1200 @60Hz
125 ft (38 m) for 1600x1200 @60Hz
50 ft (15 m) for 1080p60 Deep Color
Maximum total length using up to 2 repeaters:
450 ft (137 m) for 720p, 1080i, 1080p24
450 ft (137 m) for 1024x768 @75Hz
450 ft (137 m) for 1080p60
450 ft (137 m) for 1280x1024 @75Hz
450 ft (137 m) for 1920x1200 @60Hz
375 ft (114 m) for 1600x1200 @60Hz
150 ft (45 m) for 1080p60 Deep Color
Controls & Indicators
PWR: (1) green LED, indicates operating power supplied via DMNet
DM LINK: (1) green LED, indicates DM Link status
HDMI IN: (1) green LED, indicates HDMI input signal presence and
lock status
SETUP: (1) red LED and (1) miniature recessed pushbutton for
Ethernet setup
RESET: (1) miniature recessed pushbutton for hardware reset
LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED
indicates Ethernet activity
Power Requirements
DMNet Power Usage: 9 Watts (0.38 Amps @ 24 Volts DC)
Environmental
Temperature: 32° to 104°F (0° to 40°C)
Humidity: 10% to 90% RH (non-condensing)
Heat Dissipation: 31 BTU/Hr
Enclosure
Chassis: Aluminum w/polycarbonate label overlay and (4) integral
mounting flanges
Mounting: Freestanding, surface mount, or attach to a single rack rail
Dimensions
Height: 7.60 in (193 mm)
Width: 4.56 in (116 mm)
Depth: 1.43 in (37 mm)
Weight
18.3 oz (517 g)
MODELS & ACCESSORIES
Available Models
DM-TX-100: DigitalMedia
™
CAT Transmitter 100
Available Accessories
DM-CBL-NP: DigitalMedia
™
Cable, non-plenum
DM-CBL-P: DigitalMedia
™
Cable, plenum-rated
DM-CONN-20: DigitalMedia
™
Cable Connectors, 20-Pack
DM-DR: DigitalMedia
™
CAT Repeater
CBL Series: Crestron
®
Certified Interface Cables
MP-WP Series: Media Presentation Wall Plates
MPI-WP Series: Media Presentation Wall Plates - International Version
IRP2: IR Emitter Probe
Notes:
1. For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable. Up to two DM CAT Repeaters
(Model DM-DR) may be required. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546
for complete system design guidelines. All cable sold separately.
2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort
Multimode signal. CBL-HD-DVI interface cables available separately.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please
contact the Crestron sales representative for your area. A list of sales representatives is available
online at www.crestron.com/salesreps or by calling 800-237-2041.
Specifications subject to change without notice. Crestron is not responsible for errors in
typography or photography.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron, Crestron Toolbox, DigitalMedia, DM, DMNet, and the Crestron logo are either trademarks
or registered trademarks of Crestron Electronics, Inc. in the United States and/or other Countries.
Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in
the United States and/or other countries. DTS and DTS-HD Master Audio are either trademarks
or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the
HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United
States and/or other countries. Other trademarks and trade names may be used in this document
to refer to either the entities claiming the marks and names or their products. Crestron disclaims
any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.
Comentarios a estos manuales