Crestron Green Light DIN-HUB Guía de instalación descargar pdf (Pagina 12)

DIN Rail Analog Output Module Crestron DIN-AO8

Connectors, Controls & Indicators (Continued)

# CONNECTORS*,

CONTROLS &

INDICATORS

DESCRIPTION

5 OVERRIDE with LEDs

and Button

(2) 2-pin 3.5 mm detachable

terminal blocks, paralleled

Max Wire Size: 1.5 mm

(16 AWG)

Sensing input for external

low-voltage contact closure

Triggers module’s override

state when a closure is present

Minimum Override Switch

Rating:

10 mA (per module) at 24 Volts

(1) Red LED and (1) miniature

pushbutton for enabling manual

override and saving override

preset levels. For more

information, refer to “Operation”

on page 21.

6 PWR (1) Green LED, illuminates

when DC power is applied to

the NET port

7 NET (1) Yellow LED, indicates

communication with the control

processor

8 RESET (1) Recessed miniature

pushbutton, resets internal

processor

* Interface connectors for NET, OVERRIDE and OUTPUT ports are provided

with the unit.

8 • DIN Rail Analog Output Module: DIN-AO8 Operations & Installation Guide – DOC. 6663A

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Sin comentarios

Crestron Green Light DIN-HUB Guía de instalación Pagina 12