Crestron TPS-IMC-BV Guía de instalación descargar pdf (Pagina 12)

Video Card for TPS/Tilt Panel Crestron TPS-VID-1 & TPS-VID-2

8. Align the pins on the touchpanel interface connector of the

TPS-VID-1 or TPS-VID-2 with the touchpanel motherboard

connector. DO NOT force pins into connector. Press the TPS-

VID-1/VID-2 until the pins are fully seated. Make sure that the

screw holes of the card align with the mounting posts on the

motherboard. Refer to the following diagram for a detailed

view.

TPS-VID-1/VID-2 Installation (3 of 6) – Install TPS-VID-1/VID-2

9. Install the four mounting screws (supplied), tighten to

finger-tight then, using a Phillips screwdriver, tighten each

screw an additional 1/8-turn. Refer to the following diagram for

screw locations.

8 • Video Card for TPS/Tilt Panel: TPS-VID-1/TPS-VID-2 Operations & Installation Guide - DOC. 6059

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Sin comentarios

Crestron TPS-IMC-BV Guía de instalación Pagina 12