Crestron TPS-IMC-BV Especificaciones descargar pdf (Pagina 13)

Crestron TPS-XVGA-BV RGB Computer Interface Card for TPS/Tilt Panel

Operations & Installation Guide - DOC. 5920 RGB Computer Interface Card with Balanced Video for TPS/Tilt Panel: TPS-XVGA-BV •• 9

9. Refer to the diagram below. Using a #1 Phillips screwdriver,

loosen, remove and discard the two screws that secure the RGB

port blank plate. From the inside of the touchpanel base,

remove the plate and discard.

Installation Diagram 3 of 7 - Remove RGB Port Blank Plate

CAUTION: During the next step, to prevent tearing or distorting the

touchpanel label, tighten the plate mounting screws only to the

specification described.

10. Refer to the diagram on the next page. Orient the RGB port

access plate (supplied) with the offset facing the rear of the

touchpanel base and position to the inside of the touchpanel

base port. Install the two plate mounting screws (supplied),

tighten to finger-tight then, using a #1 Phillips screwdriver,

tighten an additional 1/16-turn.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sin comentarios

Crestron TPS-IMC-BV Especificaciones Pagina 13