Crestron CNX-AUDIO-6PAK Guía de instalación descargar pdf (Pagina 15)

Crestron CNX-AUDIO-6PAK Six-Zone Audio Package

For example, a CD might automatically be assigned to port C of an IR card. To place

this device on port D, simply click the Configure button, select the Port Assignment

tab from the "Device Settings" window, and choose a new port assignment.

The Controller area displays all control information about the device that controls

the currently selected device. For example, if the selected device is an IR controlled

CD, the controller may be an IR card such as the CNXIR-8. The top line of text

displays a description of this controlling device. The list box shows all controllers to

which the current device may be assigned. There are three buttons to modify the

contents of the list box.

• Click the Configure button to modify the controller location in the

control system.

• Click the New button to add a controller to the list assuming a valid

controller is available.

• Click the Remove button to remove the currently selected controller

from the list. Some controllers (i.e., built-in cards) cannot be removed.

NOTE: Expert users can always modify any of the device properties directly in

SIMPL Windows, after the program is generated.

Properties

The Properties tab of the "Device # Properties" window, shown after this paragraph,

lists a set of values for specified functions. Crestron recommends that the default

values are used, but the programmer is free to alter them. Click the OK button to

apply and save any changes made and close the window. The Cancel button closes

the window without saving any changes that have been made.

NOTE: This tab is not available for all devices.

"Device # Properties" Window – Properties Tab

Operations & Installation Guide - DOC. 8169 Six-Zone Audio Package: CNX-AUDIO-6PAK • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 27 28

Sin comentarios

Crestron CNX-AUDIO-6PAK Guía de instalación Pagina 15