Crestron C2N-CBD Guía de instalación descargar pdf (Pagina 20)

Cameo Keypads Crestron C2N-CBD-TS/C2N-CBF-T

16 • Cameo Keypads Operations & Installation Guide - DOC. 6603D

Standard Mounting Installation

The standard-mount Cameo keypad is supplied partially assembled along

with several items as listed in the following table.

Supplied Parts/Assemblies – Standard Mounting

ITEM

DESCRIPTION

QTY

Rear housing

assembly

Rear housing with switch circuitry

attached

Bezel assembly Bezel and metal plate assembly, with

ground wire

4-pin female mini

network connector

Used to connect Cresnet network cable

to the keypad

3-pin female mini

network connector

The cable is to be used to connect

contact closure to the keypad

Screws, Black,

Phillips pan head,

2-28 x 3/16”

Used to attach the bezel assembly to

the keypad rear housing and switch

assembly

Screws, Steel,

Phillips, pan head,

6-32 x 7/8”

Used to attach the assembled keypad to

an electrical box

Assemble the keypad as described in the following steps. Refer to the

accompanying illustration.

1. Arrange the button caps and/or spacers in position on the rear

housing assembly according to the program plan.

2. Carefully position the bezel over the button caps on the rear

housing assembly.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

Sin comentarios

Crestron C2N-CBD Guía de instalación Pagina 20