Crestron C2N-FTB Guía de instalación descargar pdf (Pagina 16)

FlipTop Control Center, Dual AC Outlets Crestron C2N-FTB-D

When selecting cables for installation in the C2N-FTB-D, cable connector length and

strain relief diameter are important considerations.

• If the connector is too long, it can interfere with cover operation and scratch

the buttons.

• If the width of the cable strain relief is too similar to the bushing inside

diameter, the bushing can trap the cable.

NOTE: Do not use the cable support plate without the bushings.

Example Cable End

Cable Passes Through the Plate

NOTE: Ensure that the cables have sufficient clearance to enable smooth

movement. Allow approximately 40 inches (102 cm) from the top surface of the

FlipTop box.

12 • FlipTop Control Center, Dual AC Outlets: C2N-FTB-D Operations & Installation Guide – DOC. 6639B

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 31 32

Sin comentarios

Crestron C2N-FTB Guía de instalación Pagina 16