Crestron QM-FTDC Guía de instalación descargar pdf (Pagina 28)

FlipTop Data Center Crestron QM-FTDC

gauge used in interconnecting cables. The ratings on the connecting unit's supply

input should be considered to prevent overloading the wiring.

Attach the optional labels (included) to the pass-through telecommunication

connectors 1, 2 and 3.

Ground Wire Connections

Proper grounding is required. Connect the ground from the QM transmitter

(QM-FTDC) to earth ground. Connect the Cresnet shield at the QM-RMCRX-BA to

the chassis ground provided on the QM-RMCRX-BA. The QM-RMCRX-BA chassis

must also be connected to an earth ground (building steel). Refer to the following

grounding diagram.

Ground Wire Connections

NOTE: Do not connect the shield to earth ground at the QM-FTDC.

24 • FlipTop Data Center: QM-FTDC Operations & Installation Guide – DOC. 6312B

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Sin comentarios

Crestron QM-FTDC Guía de instalación Pagina 28