Crestron QM-RMCRX-BA Especificaciones descargar pdf (Pagina 25)

Crestron QM-RMCRX-BA QuickMedia™ Receiver/Processor

Crestron Toolbox – “Address Book” Window

The PC communication settings specified in the address book should

match the protocol that the QM-RMCRX-BA expects. The settings are

as follows:

• Port = COM 1 through COM 8. Select the correct COM port

on the PC.

• Baud rate = 115200.

• Parity = None.

• Number of data bits = 8.

• Number of stop bits = 1.

• Hardware handshaking (RTS/CTS) enabled.

• Software handshaking (XON/XOFF) not enabled.

2. After setting the correct parameters, click OK to return to the Crestron

Toolbox main window.

3. Select Tools | System Info. If the connection is successful, the window

displays the Net ID and serial connection parameters in the General

area of the System Info window.

5. To enter the console mode, click the console mode icon

The COM B LED should be flashing.

Operations Guide – DOC. 6332 QuickMedia™ Receiver/Processor: QM-RMCRX-BA • 21

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 75 76

Sin comentarios

Crestron QM-RMCRX-BA Especificaciones Pagina 25