Crestron Adagio ATC-AMFMSR Especificaciones descargar pdf (Pagina 18)

Entertainment System Crestron Adagio™ AES

Connectors, Controls, & Indicators (Continued)

# CONNECTORS,

CONTROLS, &

INDICATORS

DESCRIPTION

30 RELAY OUTPUT

(4) Normally open isolated relays; rated to

1A, 30V (AC/DC) with MOV arc

suppression across contacts for control of

“real world” loads. An eight-pin terminal

block interface connector is included.

31 COM A & COM B

(2) DB9, male, bidirectional RS-232 ports;

Up to 115.2k baud with hardware and

software handshaking support for

communication with serial devices. Can

also be used for modem communications.

The following table lists the pin

assignments of the serial ports.

PIN DIRECTION DESCRIPTION

1 To AES (DCD) Data Carrier

Detect

2 To AES (RXD) Receive Data

3 From AES (TXD) Transmit Data

4 From AES (DTR) Data Terminal

Ready

5 Common (GND) Ground

6 To AES (DSR) Data Set

Ready

7 From AES (RTS) Request To

Send

8 To AES (CTS) Clear To Send

9 To AES (RI) Ring Indicator

32 COMPUTER

One 6-pin RJ-11 female, computer

console port. Use with included serial

cable.

Pin 1: CTS

Pin 2: GND

Pin 3: RXD

Pin 4: TXD

Pin 5: RTS

Pin 6: N/C (Not connected)

33 LAN

One 8-wire, RJ-45 female connector with

two LED indicators. The green LED

indicates link status while the yellow LED

indicates Ethernet activity. The port

supports 10BaseT/100BaseTX Ethernet

communications.

34 NET

(2) Four-pin terminal block connectors

provide Cresnet connections to AAE

devices. A four-pin terminal block interface

connector is included for each port.

(Continued on following page)

14 • Entertainment System: Adagio AES Operations Guide – DOC. 6456B

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 79 80

Comentarios a estos manuales

Sin comentarios

Crestron Adagio ATC-AMFMSR Especificaciones Pagina 18

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Crestron Adagio ATC-AMFMSR