Crestron DM-RMC-100-C Guía de instalación descargar pdf (Pagina 18)

DigitalMedia 8G+ Receiver 100 Crestron DM-RMC-100-C

12  DigitalMedia 8G+ Receiver 100: DM-RMC-100-C Operations & Installation Guide – DOC. 7000C

4. The DM IN port consists of one RJ-45 connector. Refer to the following table for the connector

pinouts.

DM IN Connector Pinouts

PIN # WIRE COLOR PIN # WIRE COLOR

1 Orange/White 5 Blue/White

2 Orange 6 Green

3 Green/White 7 Brown/White

4 Blue 8 Brown

5. Receiving Power over DM (PoDM) or Power over HDBaseT (PoH) requires connection to a switcher

or other equipment that has a PoDM or PoH PSE (Power Sourcing Equipment) port.

6. For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G cable, Crestron DM-CBL

DigitalMedia cable, Crestron DM-CBL-D DigitalMedia D cable, or generic CAT5e (or better) UTP or

STP. Maximum wire length for DM 8G+ is 330 feet (100 meters) between devices. Shielded cable

and connectors are recommended to safeguard against unpredictable environmental electrical noise

which may impact performance at resolutions above 1080p. Refer to the latest version of the Crestron

DigitalMedia Design Guide (Doc. 4546) for complete system design guidelines. DM 8G+ is also

compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment.

All wire and cables sold separately.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Sin comentarios

Crestron DM-RMC-100-C Guía de instalación Pagina 18