Crestron DM-RMC-200-S2 Guía de instalación descargar pdf (Pagina 33)

Crestron DM-RMC-200-S/S2 DigitalMedia 8G Fiber Receiver 200

3. Use the Address Book in Crestron Toolbox to create an entry for the DM

receiver using the TCP connection type, and enter the IP address of the DM

receiver.

4. Display the “System Info” window of the DM receiver (click the

icon);

communications are confirmed when the device information is displayed.

USB Communication via DM Switcher

To establish USB communication between the PC and the DM switcher:

1. Use the Address Book in Crestron Toolbox to create an entry using the

expected communication protocol (USB). When multiple USB devices are

connected, identify the DM switcher by entering “DM-MD8X8”,

“DM-MD16X16”, or “DM-MD32X32” in the Model textbox, the unit’s

serial number in the Serial textbox, or the unit’s hostname in the Hostname

textbox. The hostname can be found in the “System Info” window in the

section marked Ethernet; however, communications must be established in

order to see this information in the “System Info” window.

2. Display the “System Info” window (click the

icon); communications

are confirmed when the device information is displayed.

Operations & Installation Guide – DOC. 7246B DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2  27

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Sin comentarios

Crestron DM-RMC-200-S2 Guía de instalación Pagina 33