Crestron SP-1 Manual de usuario descargar pdf (Pagina 8)

CRESTRON

4 •• Slide Controller: SP-SC Operations Guide - DOC. 5729

SP-SC with SmarTouch™ ST-CP

Connect the 3.5 mm, Serial Data Cable (supplied) to the input port on the SP-SC.

Connect the other end of the cable to one of the outputs on the ST-CP. The EBY,

five-pin, pickle type connector should be plugged into the projector.

To program the ST-CP for the Slide Controller, refer to the SmarTouch STS Wizard

included with VisionTools Pro™ or Crestron's SIMPL™ Windows® programming

software (v 1.20.04 or later) and the latest version of the Crestron Database (v

11.7.207).

NOTE: An external power supply must be used when using the SP-SC with the

SmarTouch ST-CP system. Refer to "Specifications" on page 2 for part number and

input/output voltage specifications.

Connect Serial Data Cable to ST-CP

To Slide Projector

Serial Data CableSerial Data Cable

External

Power Supply

Serial Data Cable

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Sin comentarios

Crestron SP-1 Manual de usuario Pagina 8