Crestron D3 PRO Información técnica descargar pdf (Pagina 53)

Crestron D3 Pro

™

Software

When you open VTPro-e, you can select a button and adjust its programming using

the D3 Pro Programming dialog box.

Keypad buttons are identified by their position, or button number, where "Button #1"

is the top left position. The button numbers increase left to right per row and top to

bottom. Objects on touchpanels are identified by the object type and join number. For

example a button with join number 77 will be referenced as "Button (Join #77)".

Once you have selected a button for programming, you must select the button model

and feedback type. Depending on the button model you may also have the option to

synchronize events and/or set the button to "learnable lighting" mode. Then define

the actions that will be triggered by each event. All of these topics are described in

detail in this section.

Button Models

The first step in programming any button is to select a button model. Each button

model provides different programmable events and may also provide a default

feedback type. Some button models also provide "non-programmable" events that

trigger pre-defined actions.

Reference Guide – DOC. 5998a Crestron D3 Pro™• 49

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 103 104

Sin comentarios

Crestron D3 PRO Información técnica Pagina 53