Crestron TPMC-3SMD Manual de usuario descargar pdf (Pagina 16)

Wall Mount & Designer Touch Screens Crestron TPMC-3SM & TPMC-3SMD

screen. When a button is pressed, its corresponding indication on the screen will

light. Touch Back to return to the “Diagnostics” screen.

Touch Test

From the “Diagnostics” screen, touch Touch Test to display the touch test screen,

shown in the illustration below.

Touch Test Screen

The touch test screen contains a Calibrate button to initiate touch screen calibration

and a Return button to return to the “Diagnostics” screen.

During touch screen calibration, a crosshair will appear at the center of the screen.

Touch the center of the crosshair, which will then move to the lower right part of the

screen. Touch the center of the crosshair and it will move to another part of the

screen. Continue touching the center of the crosshair until calibration is complete.

NOTE: When touching the screen during calibration, be as accurate as possible.

Use the tip of a capped pen or the eraser end of a pencil.

12 • Isys

2.8” Touch Screens: TPMC-3SM & TPMC-3SMD Configuration Guide – DOC. 7269A

1 2 ... 11 12 13 14 15 16 17 18

Sin comentarios

Crestron TPMC-3SMD Manual de usuario Pagina 16