Crestron n TPMC-12 Manual de usuario descargar pdf (Pagina 6)

4.3” Touch Screen Crestron TPMC-4SM

2 • Fusion RV Interface for TPMC-4SM Operations Guide – DOC. 6846B

Touch Screen Configuration

The TPMC-4SM touch screen supports a direct connection to Crestron’s Fusion RV

software application.

To connect to Fusion RV, first enter the “Panel Setup Options” screen by touching

the screen while booting the touch screen. Set the desired Ethernet configuration for

the touch screen using the “Ethernet Setup” screens and make note of the touch

screen’s IP address.

NOTE: For details on the setup options for the TPMC-4SM, refer to the

“Configuring the Touch Screen” section of the latest version of the TPMC-4SM

Operations & Installation Guide (Doc. 6845) or TPMC-4SM-FD Operations &

Installation Guide (Doc 7173).

On the “Panel Setup Options” screen, the button on the lower right allows selection

of either User Project Mode Off and User Project Mode On. The text on the button

reflects which mode is currently selected. Touching the button toggles between

modes. This must be set to User Project Mode Off in order to make the connection to

Fusion RV. Refer to the following illustration. Touch Save & Exit to confirm the

settings.

“Panel Setup Options” Screen

After the touch screen has updated, the screen displays a “Waiting for RoomView

connection…” message, as shown in the following illustration.

“Waiting for RoomView connection…” Screen

1 2 3 4 5 6 7 8 9 10 11 ... 43 44

Sin comentarios

Crestron n TPMC-12 Manual de usuario Pagina 6