Crestron CNRACKX-DP Especificaciones descargar pdf (Pagina 30)

CNX Dual Processor Modular Control System Crestron CNRACKX-DP

SIMPL+ Program(s) option is checked in the “What to Send” field, the

associated files will be transferred after the program is transferred.

Cresnet Simpl Program Dialog Box

NOTE: The permanent memory image is the program stored into flash memory.

From the image, the program can be recalled automatically if power to the unit is lost

or interrupted. Permanent memory can be overwritten as many times as needed.

5. When a Query dialog box opens to create the permanent memory

image, click Yes. A Success dialog box opens when the permanent

memory image is complete. If the Failure dialog box opens, repeat

steps 3 and 4. If this does not remedy the problem, call Crestron

technical support. Refer to “Further Inquiries” on page 33.

NOTE: Not normally required, the Make Permanent button also creates a

permanent memory image.

6. After transferring the program file, click on the Check Program button

to ensure that the file loaded properly. The information in the Current

Program field of the Cresnet Simpl Program dialog box should update

and display the file currently loaded. If the information does not update,

repeat steps 3 through 5. If this does not remedy the problem, call

Crestron technical support. Refer to “Further Inquiries” on page 33.

7. If the system program has not been loaded into both processors, refer to

the first note at the beginning of this procedure, electronically switch

active processors, and repeat this procedure.

Copying NVRAM

The NVRAM (non-volatile random access memory) retains specified system startup

information. Examples are lighting brightness, audio and video equipment turn-on,

or audio startup volume (independent of a CNX-PAD8 program).

NOTE: In order for the CNRACKX-DP to be fail-safe operational, the NVRAM

must be identical in both CNXCPUs.

To copy NVRAM from one CNXCPU to the other, complete the following steps:

1. Select Tools | Viewport to open the Crestron Viewport dialog box.

26 • CNX Dual Processor Modular Control System: CNRACKX-DP Operations Guide - DOC. 8151

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Sin comentarios

Crestron CNRACKX-DP Especificaciones Pagina 30