Crestron FT-PWR Guía de instalación descargar pdf (Pagina 12)

FlipTop Power Center Crestron FT-PWR-D-B & FT-PWR-D-BALUM

8 • FlipTop Power Center: FT-PWR-D-B & FT-PWR-D-BALUM Operations Guide – DOC. 6640A

Cable Support Plate Installation

When selecting cables for installation in the FT-PWR-D, cable connector length and

strain relief diameter are important considerations.

• If the connector is too long, it can interfere with cover operation.

• If the width of the cable strain relief is too similar to the bushing inside

diameter, the bushing can trap the cable.

NOTE: Do not use the cable support plate without the bushings.

Example Cable End

Must be wider than the inside diameter of the bushing

Large Bushing: 0.54 in (1.37 cm)

Medium Bushing: 0.39 in (0.99 cm)

Small Bushing: 0.31 in (0.79 cm)

Must not be longer than 2.13 in

(5.4cm) to avoid interference

with cover operation

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Crestron FT-PWR Guía de instalación Pagina 12