Crestron CNRFGWX Especificaciones descargar pdf (Pagina 23)

Crestron Best Practices RF Products

Appendix: Channel Map Worksheet

For your convenience, this appendix provides a blank channel map worksheet

followed by a checklist of the steps necessary to complete the channel map. If you

are conducting a site survey, it is suggested that you print this page and include it

with the items you take to the site location.

Channel Map Worksheet

CHANNEL NUMBERS

NETWORK

802.15.4

CHANNELS

Wi-Fi 802.11

CHANNELS

11 1

12 2

13 3

16 6

17 7

18 8

21 11

Complete the channel map according to the following checklist.

 Step 1: Eliminate the channels that were found to have too much

interference during the site survey.

 Step 2: Enter the 802.11b/g-only networks.

 Step 3: Enter the 802.11a/b/g networks.

 Step 4: Enter the FocalPoint networks.

 Step 5: Enter the infiNET and infiNET EX networks. Note that, in

most systems, the infiNET network should be set in fixed mode to

remain on the selected channel. For smaller systems with only one or

two infiNET gateways and minimal interference detected in the system

sweep, it is recommended that the C2N-MNETGW be set to select the

operating channel automatically.

NOTE: If there is not enough free space to enter all networks on the channel

map worksheet using the steps above, select 802.11a channels for some or all

802.11a/b/g networks, and then repeat steps 4 and 5.

Reference Guide – DOC. 6689C Best Practices – RF Products • 19

1 2 ... 18 19 20 21 22 23 24

Sin comentarios

Crestron CNRFGWX Especificaciones Pagina 23