
Crestron Adagio
®
ATC-AMFMXMD AM/FM/XM Tuner Card
Tuner Card Installation
5. Push the ATC-AMFMXMD card into the slot until it stops at the rear
connector, and then push again until the ATC-AMFMXMD card snaps
into place.
6. Secure the card in place by tightening the two slotted screws by hand.
The screwdriver slots are provided for removal only.
7. Connect antenna(s).
8. Apply power to the Adagio system.
Regional Configuration
Once the tuner card is installed, users may change the AM/FM tuner configuration
for North American and European signal reception. For instructions on changing the
regional configurations refer to the latest revision of the Crestron CEN-TRACK
Operations Guide (Doc. 6646) or the operations guide for your particular Adagio
system that feature tuner card slots which can be obtained from the Crestron website
(http://www.crestron.com/manuals).
Hardware Hookup
Make the necessary connections as called out in the following illustration.
Hardware Connections for the ATC-AMFMXMD
FM ANTENNA:
CONNECT SUPPLIED
OR OUTDOOR
ANTENNA
EXTERNAL AM
ANTENNA IN
AM ANTENNA:
CONNECT THE SUPPLIED
AM ANTENNA
XM ANTENNA:
CONNECT SUPPLIED
XM ANTENNA
EXTERNAL
AM
ANTENNA
OUT
Operations & Installation Guide – DOC. 6605A AM/FM/XM Tuner Card: ATC-AMFMXMD • 7
Comentarios a estos manuales