
Crestron C2N-IADS30X24 Intercom Audio Distribution System
Intercom Audio Distribution
System: C2N-IADS30X24
Introduction
Features and Functions
• 16 RCA inputs combine left and right channels to create eight
mono inputs.
• 22 CAT5 line inputs/outputs for door stations and TPS
touchpanels (remote audio in/out).
• 4 RCA outputs representing two mono channels by combining the
left and right channels of each audio input.
• 1 five-pin miniconnector for CNXTA telephone card interface for
dial-up paging and control.
• 1 four-pin miniconnector for Cresnet hookup.
• Built-in 30x24 audio crosspoint switch. Any mono input can be
routed to any mono output. Any output can be turned off,
providing a high-isolation off state.
• Touch-settable ID (TSID) ready.
The C2N-IADS30X24 Intercom Audio Distribution Switcher (IADS) facilitates the
distribution and control of audio intercom signals for up to 22 touchpanels and door
stations using inexpensive CAT5E cable. The IADS integrates neatly with Crestron's
CNX-PAD8A and CNX-BIPAD8 audio distribution processors, enabling voice
paging from any microphone-equipped touchpanel to room loudspeakers throughout
the house or office, and allowing audio from central AV sources to be distributed to
any touchpanel.
The IADS is built around a fully programmable 30x24 audio crosspoint matrix,
providing extensive flexibility for the distribution of intercom and other monaural
audio signals. Interfaced through 22 bidirectional CAT5 audio ports, the matrix
provides complete freedom to route the microphone signal from any one touchpanel
or door station to the speakers in another, with real-time control to permit fluid
talk/listen (half-duplex) intercom functionality. Crestron offers several touchpanel
models equipped with built-in microphones and speakers designed for use with the
IADS. Door stations are easily implemented using the C2N-IIF Intercom Interface
(sold separately).
Operations Guide – DOC. 6170A Intercom Audio Distribution System: C2N-IADS30X24 • 1
Comentarios a estos manuales