Crestron C2N-IADS30X24 Especificaciones descargar pdf (Pagina 6)

Intercom Audio Distribution System Crestron C2N-IADS30X24

Eight unbalanced inputs are also provided to accept signals from the unbalanced

room outputs or loop-thru connectors of a Crestron audio distribution processor, or

from any stereo sources. Stereo input signals are internally summed to mono. Any

input signal may be freely routed to any number of CAT5 outputs. In addition, there

are two unbalanced outputs provided for connection to room inputs on the audio

distribution processor, allowing microphone and other signals to be routed to any set

of room speakers, easily accommodating the most complex zone-paging scheme.

Additional configurations can be achieved by interfacing CAT5 audio ports on the

IADS directly to CAT5 audio ports on the CNX-BIPAD8 and many other Crestron

products.

A 5-pin connector, paralleled with the last CAT5 I/O port, permits interfacing to

Crestron's CEN-TIA Telephone Interface Module (sold separately), enabling dial-up

paging through the client's phone system, and distribution of door chimes and other

sounds through the room loudspeakers.

The IADS functions as a slave device to any 2-Series control system communicating

via the Cresnet

control network.

Applications

Although the IADS can function alone as an intercom audio distribution controller, it

is ideally suited to work in combination with the C2N-IVDS24X24 (IVDS) intercom

video distribution system along with other Crestron audio/visual components and

TPS touchpanels to provide a variety of A/V functions throughout the facility. (Refer

to the simplified system diagram on page 3 and the functional diagram on page 4 for

more details.)

Paging

Connect the audio outputs of the IADS to a Crestron CNX-PAD8A (PAD8A) or

CNX-BIPAD8 (BIPAD8) audio distribution system to add whole facility paging

through the audio distribution system.

Connect a Crestron CNXTA telephone card (requires a control system that accepts

expansion cards) to the IADS to allow dial-up paging to specific or to all zones

throughout the facility.

A/V Source Monitoring

Connect the output of a PAD8A or BIPAD8 to the IADS to listen to A/V sources

through your TPS touchpanels.

Security Camera Monitoring

Connect the IVDS output to the input of a CNX-PVID8X4 or CNX-PVID8X3

(PVID8) video distribution system to view security camera output through any

display device, such as a plasma display or a projector, connected to the PVID8

output.

Video Monitoring

Connect the PVID8 output to the IVDS to watch video sources on your touchpanels.

Access Monitoring

Connect door station security camera, mic/speakerphone, and doorbell inputs and/or

outputs to the IADS and IVDS to monitor and control access to the facility from any

of your TPS touchpanels.

2 • Intercom Audio Distribution System: C2N-IADS30X24 Operations Guide - DOC. 6170A

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comentarios a estos manuales

Sin comentarios

Crestron C2N-IADS30X24 Especificaciones Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta Crestron C2N-IADS30X24