Crestron MT-1000C Guía de usuario descargar pdf (Pagina 7)

Crestron MT-1000C 3.8 Inch RF Remote

The following are the earliest useable software version requirements for the PC:

• SIMPL Windows version 2.05.22 or later, Library 321 and SIMPL+

Cross Compiler version 1.1.

• Crestron VisionTools

Pro-e (VT Pro-e) version 3.3.3.5 or later. Use

version 3.3.3.6 or later to program hard keys 14, 15 and 16.

• Crestron Database version 17.1.0 or later. Required by SIMPL

Windows and VisionTools Pro-e.

• Crestron Toolbox 1.0.7 or later.

• Control system upgrade file (CUZ) version 3.008 or later.

• Microsoft

ActiveSync

version 3.8 or later (On the CD included with

the MT-1000C).

NOTE: To upgrade the MT-1000C firmware version 2.22.1.50520 in order to

use hard keys 14, 15 and 16, use Crestron Toolbox version 1.0.7 or later.

NOTE: If you are using a CNRFGWA-418 or an MC2W that was shipped prior

to February 15, 2005 you must upgrade the unit at the factory.

Microsoft

ActiveSync

and the MT-1000C Driver

The MT-1000C requires Microsoft ActiveSync and the MT-1000C driver for

communication with Crestron Toolbox. The MT-1000C driver is included in VT

Pro-e version 3.3.3.5 or later and with Crestron Toolbox.

NOTE: Begin the installation process with the equipment disconnected.

When you install VT Pro-e, the software searches for ActiveSync on your

computer. If it is not found, you will be prompted to install ActiveSync. Restart

the computer after installing the VT Pro-e and MT-1000C components or

Crestron Toolbox.

Please use the following steps to install ActiveSync.

1. Your MT-1000C comes with a CD that contains Microsoft ActiveSync.

Find and run “ActiveSync.exe” from the included CD.

2. When a new setup window opens for ActiveSync, click NEXT.

“Microsoft ActiveSync” Setup Window

Programming Guide – DOC. 6330A 3.8 Inch RF Remote: MT-1000C • 3

1 2 3 4 5 6 7 8 9 10 11 12 ... 35 36

Sin comentarios

Crestron MT-1000C Guía de usuario Pagina 7