Crestron TPS-MEM64MB Guía de instalación descargar pdf (Pagina 6)

Flash Memory Crestron TPS-MEM64MB & TPS-MEM128MB

Physical Description

Each memory expansion module is a printed circuit board (PCB)

designed for installation into a specific memory socket on the TPS

device’s motherboard.

Industry Compliance

As of the date of manufacture, the flash memory for TPS user interfaces

has been tested and found to comply with specifications for CE marking

and standards per EMC and Radiocommunications Compliance

Labelling.

NOTE: This device complies with part 15 of the FCC rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Verifying Installed Memory

If unknown, the total amount of flash memory residing on a given TPS

device can be easily determined. This can be done locally (the device is

within close physical proximity, and not necessarily networked) or

remotely (networked device located over some distance).

Local Verification

Enter the “SETUP MODE” as described in the "Configure the …"

section of the TPS device’s Operations Guide. From the Main Menu,

navigate to the Diagnostics Menu and select the Display Configuration

button. The new screen displays a list of configuration information.

Search for the item titled “Flash Total Size”. The amount of flash

memory residing in the device is shown.

Remote Verification

To remotely view the amount of memory that is installed in a TPS

device, the Crestron Viewport must be used.

2 • Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB Installation Guide - DOC. 6261

1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Sin comentarios

Crestron TPS-MEM64MB Guía de instalación Pagina 6