
Crestron TPMC-10 Isys i/O
™
WiFi Touchpanel
Digital Input & Output Signal Descriptions (continued)
TOUCHPANEL
SIGNAL NAME
AND TYPE
VT Pro-e
JOIN TYPE
VT Pro-e
OBJECT
DESCRIPTION
Digital
Press Join
Button
Causes the button to display in the active
state for as long as the signal is high.
When connected to the corresponding
<press> output, this means the button will
display active feedback for the duration of
the button press.
Note that this behavior applies to the
touchscreen buttons only. Since <fb1>
through <fb8> correspond to hard
pushbuttons with no visible feedback,
connecting them as just described will
have no effect.
High/1 (level sensitive) = Active feedback;
Low/0 = Inactive feedback
Open/Close
Embedded
Application
Opens the embedded application when
the input goes high. When the input goes
low, this closes the application.
High/1 (level sensitive) = Open application;
Low/0 = Close application
Open File
Window
Embedded
Application
Displays the "Open File" window on the
rising edge of the signal. This window
allows the user to locate a file manually.
The Open File window closes when the
end user presses or clicks the Open (or
Cancel) button.
High/1 (rising edge) = Display "Open File"
window; Low/0 = No effect
Show/Hide
Popup
Window
(System
Bar)
Shows the window for as long as the
signal is high, and hides the window when
the signal is low.
High/1 (level sensitive) = Show window;
Low/0 = Hide window
Digital inputs: <fb1>
through <fb4000>
Page Join Page
Displays the page on the rising edge of the
input.
If the signal is latched high, then on
power-up or any re-established
communication, the panel will return to the
page. Typically, all page inputs should be
interlocked to ensure that the panel will
return to the most recently viewed page
after communication is re-established.
High/1 (rising edge) = Display page;
Low/0 = No effect
(continued on next page)
Operations Guide – DOC. 6284C Isys i/O
™
WiFi Touchpanel: TPMC-10 • 25
Comentarios a estos manuales