Crestron TPMC-3X Series Manual de usuario descargar pdf (Pagina 8)

Battery Pack Crestron TPMC-3X-BTP

Charging

To charge the TPMC-3X-BTP, install the TPMC-3X-BTP in a

TPMC-3X or MTX-3 touch screen and mount the touch screen in an AC

powered TPMC-3X-DS or MTX-3-DS Docking Station/Charger

(respectively) or TPMC-3X-DSW Wall Mount Docking Station (sold

separately) or mount the TPMC-3X-LP on its AC powered docking

station.

NOTE: The battery pack may take up to 2 hours to charge in a powered

touch screen if the device is in use during charging.

Storage

The TPMC-3X-BTP can be stored in a temperate, dry place (removed

from the touch screen and docking station/charger) for up to six months

without significant irreversible degradation of its performance. The

self-discharge rate is a function of temperature and internal resistance.

High temperature storage reduces charge retention. Best results occur if

the TPMC-3X-BTP is stored at an optimal temperature of 32° to 95° F

(0° to 35° C).

NOTE: The TPMC-3X BTP should be 30-50% charged when put into

storage.

Disposal

NOTE: The TPMC-3X-BTP contains a lithium polymer battery. When

the unit can no longer retain a charge, it must be recycled or disposed of

properly. Follow local ordinances and/or regulations for disposal.

Battery must be recycled. Deliver the battery to an

appropriate recycling facility

6 • Battery Pack: TPMC-3X-BTP Installation Guide – DOC. 6796D

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Crestron TPMC-3X Series Manual de usuario Pagina 8