Crestron TPS-XDS Guía de instalación descargar pdf (Pagina 8)

Battery Pack for TPS-XTXRF Crestron TPS-XBTP

Handling

WARNING: To prevent short-circuiting, use care when handling the

TPS-XBTP. NiMH cells have extremely low internal resistance and

discharge at high current levels when shorted. As a result, high

temperatures can damage the battery pack and may cause personal injury.

Avoid accidental shorting of the TPS-XBTP electrical contacts from

uninsulated workbenches, tools, bracelets, rings and coins.

WARNING: Because the TPS-XBTP contains toxic material (nickel-

metal hydride electrolyte), do not incinerate or damage it. In the event

that the battery electrolyte contacts skin or eyes, immediately flush with

water and consult a doctor.

NOTE: The TPS-XBTP contains NiMH cells. When the battery pack

can no longer retain a charge, it must be recycled or disposed of properly.

Refer to the recycle label on the unit for disposal information.

Storage

The TPS-XBTP can be stored in a temperate dry place indefinitely

without any significant irreversible degradation of its performance. The

self-discharge rate is a function of temperature and internal resistance

(approximately 20% per month). High temperature storage reduces

charge retention. Best results occur if the TPS-XBTP is stored within a

temperature range of -4°F to 113°F (-20°C to +45°C). After an extended

storage, allow the battery pack to obtain room temperature, discharge

fully, and charge to restore full capacity. When storing battery pack for

more than 1-year, charge at least once a year to prevent leakage and

deterioration in performance due to self-discharging.

4 • Battery Pack for TPS-XTXRF: TPS-XBTP Operations and Installation Guide - DOC. 5845

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sin comentarios

Crestron TPS-XDS Guía de instalación Pagina 8