Crestron TPS-IMC-BV Especificaciones descargar pdf (Pagina 18)

Software Crestron Touch The PC Driver

Device Settings of the RS-232 COM Port in SIMPL Windows’ Configuration

Manager

4. Compile and upload the SIMPL Windows program to the control

system.

5. Proceed to “VT Pro-e Programming” that follows.

VT Pro-e Programming

The Touch the PC V2 and PC configuration must be programmed in VT Pro-e and

the project uploaded to the touchpanel. This entails the following steps, which are

explained in detail in this section.

An RGB object must be created on a page or subpage. To create an RGB object,

perform the following steps.

1. In VT Pro-e, open the touchpanel project.

2. As shown below, make sure that the project window is the active

window.

Project Window Active

3. As shown in the following image, right-click on the project and select

Properties.

• Touch the PC Driver Programmer’s Guide – DOC. 5916B

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Sin comentarios

Crestron TPS-IMC-BV Especificaciones Pagina 18