Crestron TPS-IMC-BV Especificaciones descargar pdf (Pagina 26)

Software Crestron Touch The PC Driver

Insert the tinned connection into the Cresnet connector and tighten the retaining

screw. Repeat the procedure for the other three conductors.

Crestron RJ-45 Cabling

CAUTION: The 15-foot, 10-pin RJ-45 connector cable supplied by Crestron is a

custom cable and is the only one that should be used. The end of the cable has a

metal shield that is required to protect the equipment. Using non-Crestron cables will

result in damage to the product. Other cables lengths are available from Crestron.

NOTE: When connecting the touchpanel to the interface module, do not confuse

the 8-pin audio cable with the 10-pin net/video cable.

A 15-foot, RJ-45, 10-position, NET/VIDEO cable is supplied with the TPS-IMPC.

The cable is available to provide optional lengths; part number TPS-CBL-3 is the 3-

foot version, TPS-CBL-6 is a 6-foot version, and TPS-CBL-9 is the 9-foot version.

Contact Crestron customer service for further information.

A 15-foot, RJ-45, Siamese (two cables joined together) cable is available from

Crestron. The cable minimizes the number of individual cables attached to the

touchpanel. The Siamese cable consists of a 10-position NET/VIDEO cable, an 8-

position AUDIO cable and is available to provide optional lengths. Part number

TPS-CBL-S3 is the 3-foot version, TPS-CBL-S6 is a 6-foot version, and TPS-CBL-

S9 is the 9-foot version. This cable may be used for any system configuration when

NET/VIDEO and AUDIO connections are necessary. Contact Crestron customer

service for further information.

A 15-foot, RJ-45, Triamese (three cables joined together) cable is supplied with the

TPS-IMC-BV. The cable minimizes the number of individual cables attached to the

touchpanel. The Triamese cable consists of a 10-position NET/VIDEO cable, 10-

position RGB video cable, an 8-position AUDIO cable and is available to provide

optional lengths. Part number TPS-CBL-T3 is the 3-foot version, TPS-CBL-T6 is a

6-foot version, and TPS-CBL-T9 is the 9-foot version. This cable may be used for

any system configuration when NET/VIDEO, RGB video and AUDIO connections

are necessary. Contact Crestron customer service for further information.

DB9F Adapter and RJ-11 Modular Cable

To program the touchpanel for serial communication at the RS-232 port, a DB9F to

RJ-11 adapter and 6-conductor modular (RJ-11) cable is required. These

components are not supplied but are part of the SmarTouch Programming Kit

(Crestron part number ST-PK). If already available, use these components. If

needed, contact Crestron customer service. A cable assembly that consists of a DB9F

to RJ-11 adapter and modular cable is also available from Crestron. Contact Crestron

customer service for part number STCP-502.

The DB9F to RJ-11 adapter is available commercially or contact Crestron customer

service for part number 15556. For RJ-11 modular cable specifications, refer to the

latest revision of the Crestron Network Modular Cable Requirements (Doc. 5682).

This document is available from the Downloads | Product Manuals section of the

Crestron website (www.crestron.com

• Touch the PC Driver Programmer’s Guide – DOC. 5916B

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios

Crestron TPS-IMC-BV Especificaciones Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Crestron TPS-IMC-BV