Crestron C2N-ANLZ Especificaciones descargar pdf (Pagina 15)

Crestron C2N-ANLZ Cresnet

Analyzer

Mark Events in the Log

When troubleshooting, events can be marked in the log for future analysis. To mark

events while logging:

• Start logging data as described above.

• Press either of the MARKER buttons to place a marker in the log. Pressing

the MARKER 1 button will place the text “MARK 1” in the log file.

Pressing the MARKER 2 button will place the text “MARK 2” in the log

file. When a marker button is pressed, its corresponding LED will light.

• To stop logging data, press the LOG button. The LOG LED will light and

then turn off. If text console communications are established with the

C2N-ANLZ, a message will be displayed indicating the end time of the log

in addition to file size information.

Once data has been logged, remove the memory card and use the included USB card

reader to email the log file(s) to Crestron for analysis.

Console Operation

Use the C2N-ANLZ console commands to perform many of the functions available

from the buttons on the C2N-ANLZ as well as retrieve information about the

C2N-ANLZ and the log files stored on the memory card.

Format a Memory Card

Formatting a memory card will erase any files that are stored on the card. To format

a memory card:

• Establish communications with the C2N-ANLZ and open a text console

window as described on page 9.

• Install the memory card as described on page 8.

• Type the FORMAT command and press the Enter key. The status of the

format process will be displayed.

Log Data to a Memory Card

Logged data is written to a text file on the memory card. To log Cresnet data to a

memory card:

• Establish communications with the C2N-ANLZ and open a text console

window as described on page 9.

• Install the memory card as described on page 8.

• To start logging data, type the LOG command and press the Enter key.

The LOG LED will light and then start blinking. A message will be

displayed indicating the start time of the log.

• To stop logging data, type the -LOG command and press the Enter key.

The LOG LED will light and then turn off. A message will be displayed

indicating the end time of the log in addition to file size information.

Operations Guide – DOC. 6473 Cresnet

Analyzer: C2N-ANLZ • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

Crestron C2N-ANLZ Especificaciones Pagina 15