Crestron infiNet EX MIX-2 Guía de instalación descargar pdf (Pagina 20)

InfiNET EX Wireless Gateway Crestron CEN-RFGW-EX

14 • infiNET EX Gateway: CEN-RFGW-EX Operations & Installation Guide – DOC. 6706G

Hardware Hookup

Make the necessary connections as called out in the illustrations that

follow this paragraph. Refer to “Network Wiring” on page 11 before

attaching the 4-position terminal block connector. Apply power after all

connections have been made.

NOTE: Power should be supplied through either the LAN PoE port or

the NET port but not both.

When making connections to the CEN-RFGW-EX, use Crestron power

supplies for Crestron equipment.

Hardware Connections for the CEN-RFGW-EX

(Top and Bottom Views)

Antenna:

For Included Antenna

LAN PoE:

10BASE-T / 100BASE-TX

Ethernet to LAN

NET:

To Control System and

Other Cresnet Devices

NOTE: Antenna must be attached directly to the antenna connector. It

can be extended with an optional ANT-EXT-5 or ANT-EXT-10 Antenna

Extender (both sold separately).

NOTE: Although both the LAN PoE and NET ports can be used for

configuration, there can only be one control connection to the control

system.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Sin comentarios

Crestron infiNet EX MIX-2 Guía de instalación Pagina 20