Crestron ST-VS Especificaciones descargar pdf (Pagina 19)

Crestron ST-VS Video Sensor Module

Problem Solving

Troubleshooting

The following table provides corrective action for possible trouble situations. If

further assistance is required, please contact a Crestron customer service

representative.

ST-VS Troubleshooting

TROUBLE POSSIBLE

CAUSE(S)

CORRECTIVE ACTION

Unexpected

response from

control system.

Network devices are

not communicating

to the control

system.

From the Viewport, poll the network (F4)

to verify communication.

ST- VS is not

receiving power.

Confirm that power pack securely

plugged into outlet and that the

connector is properly attached to the ST-

VS.

Verify that proper cables are securely

attached to ST-VS NET connectors (for

Cresnet system only).

Green PWR LED

does not

illuminate.

Incorrect power

supply.

Use a Crestron power supply, PW-1205,

PWI-1210, or Cresnet.

Improper Net ID. Verify that ST-VS Net ID matches the

Net ID in the SIMPL Windows program.

Refer to "Identity Code".

Yellow NET LED

does not

Illuminate.

Loose network

connection.

Verify that cables attached to ST-VS

NET connectors are proper and secure.

Video signal is

below minimum.

Video signal must have a minimum

peak-to-peak amplitude of 0.5 VDC

(Sync to White level).

Audio signals up to 2 Vrms.

Video 1 – 4 LEDs

do not illuminate

ST-VS is not

receiving signal.

Ensure that the RCA cables are securely

attached to the ST-VS and the source.

Operations Guide – DOC. 5767A Video Sensor Module: ST-VS • 15

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentarios a estos manuales

Sin comentarios

Crestron ST-VS Especificaciones Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Crestron ST-VS