CRESTRON: GREEN LIGHT NETWORK LIGHTING CONTROLS 26 09 43 - 9
a. Lighting: 0 - 10V dimmable fluorescent ballasts.
C. Power Switching Relay, Single Pole.
1. Basis of Design Product: Crestron Model No. GLR-HD-1P.
D. Power Switching Relay, Double Pole.
1. Basis of Design Product: Crestron Model No. GLR-HD-2P.
E. Emergency Phase Loss Sensor: 120/277V, tripping transfer to emergency state.
1. Basis of Design Product: Crestron Model No. GLS-PLS-120/277.
F. Power Supply: 50W, 24 V regulated power supply with two 4-pin network connectors, fuse-
protected.
1. Basis of Design: Crestron Cresnet Power Supply Model GLA-PWS-50.
2.5 CENTRAL SIGNAL PROCESSOR
Specifier: Select control processor from 3 models listed below according to project requirements.
The Crestron IPAC-GL1 can be used as a pre-programmed or custom programmed control processor
supporting virtually any functionality imaginable. It works seamlessly with Crestron's entire line of
touchpanels, wireless remotes, lighting dimmers, shade controllers, thermostats, and more. It can also
interface with third-party devices and systems such as security and access controls, surveillance cameras,
and HVAC for a fully integrated solution.
A. Control Processor: Wall-mounted lighting control processor enabling user system programming
via LCD front panel or PC software, integrating occupancy sensing, daylight harvesting, and
remote management. 2 RS-232, 4 digital/analog input, & 4 relay control ports. 3-gang
standard box configuration.
1. Basis of Design: Crestron Integrated Professional Automation Computer Model
IPAC-GL1.
2. Mounting: [Room wall mounted, in standard 3-gang box] [Table top kit] [Table top kit
with swivel].
3. Face Color: [Black] [White].
Specifier: The Crestron PAC2 works seamlessly with Crestron's entire line of lighting dimmers and
shade controls, keypads and touchpanels, thermostats, wireless gateways, control cards, and expansion
modules.
B. Control Processor: Network connected dual bus programmable control processor for low
voltage controls, devices, and subsystems through multiple control interfaces. SNMP support,
with built-in firewall, NAT, and router. 4-wire bus providing 24 VDC power to network devices,
with two independent sensing inputs. In separate enclosure.
1. Basis of Design: Crestron Professional Automation Control System Model PAC2.
2. Mounting: [Surface-mounted] [Modular enclosure-mounted, in array indicated].
(100 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales