Crestron iMedia IM-RXV1 Guía de instalación descargar pdf (Pagina 11)

Crestron IM-RXV1 & IM-RXV3 iMedia Receiver/Processor with Video

Connectors, Controls, & Indicators

# CONNECTORS,

CONTROLS, &

INDICATORS

CONTROLS, &

INDICATORS

DESCRIPTION DESCRIPTION

1 POWER INPUT

Power connector require 3.0 A @ 18 VDC

from included power supply.

2 PWR LED

Indicates power from the included power

supply.

3 SOFTWARE RESET

Recessed below the front panel. Press this

button while the system is running to restart

the program.

4 RELAY OUTPUT

(2) Normally open isolated relays; rated to

2A, 50V (AC/DC) with MOV arc suppression

across contacts for control of “real world”

loads. A nine-pin terminal block interface

connector is included.

5 INPUT

(4) Digital inputs. Connect to 24 VDC (max)

logic output or contact closure from external

devices. A five-pin terminal block interface

connector is included.

6 INPUT LED

Indicates when an input signal is received on

any of the four digital inputs.

7 IR LED

Indicates when an output signal is

transmitted from the IR OUT port.

8 IR OUT

(1) 3.5mm tip-ring-sleeve (TRS) mini-phone

port enables infrared communications to

other devices; Use Crestron Infrared Emitter

Probe (part number STIRP, sold separately)

for controlling infrared devices.

Tip: IR Data Out

Ring: No Connection

Sleeve: Ground

9 COMPUTER

One 6-pin RJ-11 female, computer console

port. Use with STCP-502 serial cable (not

included).

PIN FUNCTION PIN FUNCTION

1 CTS 4 TXD

2 GND 5 RTS

3 RXD 6 No Connect

Tip

Ring

Sleeve

(Continued on following page)

Operations & Installation Guide – DOC. 6478 iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3 • 7

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comentarios a estos manuales

Sin comentarios

Crestron iMedia IM-RXV1 Guía de instalación Pagina 11

Comentarios a estos manuales

Relacionado con productos y manuales para Receptor Crestron iMedia IM-RXV1